-
-
XuZhou Ruili new material Co.,Ltd
Main: Polyimide tape, copper foil tape, PET high temperature tape, double-sided tape, etc
-
TEL:
15995817817
Main: Polyimide tape, copper foil tape, PET high temperature tape, double-sided tape, etc
15995817817
RUILI TAPE
XuZhou Ruili new material Co.,Ltd.was established in China Xuzhou Zone in 2024.We are able to provide services of R&D,OEM,ODM and procession services forour customers. We produce a wide variety of adhesive tapes, including Polyimide tape, Copper foil tape, PET High-Temperature Tape, Double-sided tape, and more. Our factory is equipped with five advanced coating production lines, imported separators, rewinders, cutoff machines, and comprehensive testing equipment. The workshop is clean and orderly, with the coating and cutting processes carried out in a dust-free environment. The manufacturing process strictly adheres to a quality control system. All our products comply with RoHS standards and have been approved by ***, Reach, and UL. Our tape product have been widely recognized and trusted by users.We warmly welcome all of your inquiriesUnderstand one article! Detailed explanation of polyimide high-temperature tape
High temperature tape is a type of adhesive tape mainly used in the electronics industry for use in high-temperature working environments. High temperature tape includes KAPTON high-temperature tape, PTFE high-temperature tape, high-temperature textured paper tape, PET green high-temperature tape; High temperature double-sided tape, etc. Today, the editor will focus on introducing KAPTON high-temperature tape, also known as polyimide tape. Polyimide tape Also known as KAPTON tape, gold finger tape, PI tape, it is made by coating a polyimide film substrate with high-temperature resistant adhesive. There are two types of materials: single-sided fluoroplastic release material composite or non composite. Material characteristics Polyimide tape has excellent insulation, durability, acid and alkali resistance, and temperature resistance. It can usually be used between 120 degrees and 260 degrees, and 180 degrees can be used for a long time. Excellent high-temperature electrical performance, high insulation, high temperature resistance, low temperature resistance, acid and alkali resistance, low electrolysis, good mechanical properties, wear resistance, tear resistance, special adhesive treatment, strong adhesion, leaving no residue on the covered surface after tearing. The product specification is 33M long, and the color of the tape is usually brown or golden yellow. The commonly used widths are 10mm, 15mm, 20mm, 25mm, etc. (can be customized). High precision coating up to ± 2.5um, no scratches, wire drawing or other phenomena, good shear performance, easy to punch die cutting processing. Material parameters: Substrate thickness: 0.0125mm-0.125mm Adhesive thickness: 0.025mm-0.065mm Adhesive composition: Silicone/Acrylic Adhesive strength: 450-720g/25mm Temperature resistance -10 ℃ -300 ℃ Tensile strength 14-18kg/mm Elongation rate 55% -85% Corrosion resistance: 1.0H Electrical strength: 6000V~7200V Application area Coatings: Used as insulation paint for electromagnetic wires or as high-temperature resistant coatings. Advanced composite materials: used for aerospace, aircraft, and rocket components. It is one of the most heat-resistant structural materials. Fiber: Its elastic modulus is second only to carbon fiber, and it is used as a filtering material for high-temperature media and radioactive substances, as well as bulletproof and fireproof fabrics. Foam plastic: used as high temperature resistant and heat insulating material. Engineering plastics: There are thermosetting and thermoplastic types, and thermoplastic types can be molded by compression molding, injection molding, or transfer molding. Mainly used for self-lubricating, sealing, insulation, and structural materials. Separation membrane: used for the separation of various gases, such as hydrogen/nitrogen, nitrogen/oxygen, carbon dioxide/nitrogen, or methane, to remove moisture from air hydrocarbon feed gases and alcohols. It can also be used as a pervaporation membrane and ultrafiltration membrane. Photoresist: Some polyimides can also be used as photoresists. There are negative and positive adhesives, and the resolution can reach sub micron level. When combined with pigments or dyes, it can be used for color filter films, greatly simplifying the processing steps. Application in microelectronic devices: used as a dielectric layer for interlayer insulation, and as a buffer layer to reduce stress and improve yield. As a protective layer, it can reduce the impact of the environment on the device and also act as a shield for alpha particles, reducing or eliminating soft errors in the device. Polyimide, an alignment agent used in liquid crystal displays, plays a very important role in the materials of TN-LCD, SHN-LCD, TFT-LCD, and future ferroelectric liquid crystal displays.Electro optical materials: used as passive or active waveguide materials, optical switch materials, etc. Fluorinated polyimides are transparent in the communication wavelength range, and using polyimide as a chromophore matrix can improve the stability of the material. Moisture sensitive materials: The principle of linear expansion due to moisture absorption can be used to make humidity sensors. Storage method 1. Tape should be stored in the warehouse to avoid direct sunlight and rain; Do not come into contact with acidic, alkaline, oil or organic solvents, keep clean and dry, and keep a distance of 1 meter from the discovery device. The room temperature should be between -15 ℃ and 40 ℃. 2. The tape should be placed in rolls without folding. If stored for too long, it should be flipped once every season. 3. It is best to use a crane when loading and unloading the conveyor belt, and use rigging with crossbeams to lift it steadily to avoid damaging the edge of the belt. Do not load or unload recklessly, which may cause loose rolls and loose sleeves. 4. The type and specifications of the tape should be selected reasonably according to the usage needs and specific conditions. 5. Do not connect tapes of different varieties, specifications, strength, and fabric layers together for use. 6. It is best to use hot vulcanized rubber joints for conveyor belt joints to improve reliability and maintain high effective strength. 7. The diameter of the conveyor roller and the minimum pulley diameter of the conveyor belt should comply with relevant regulations. 8. Do not make the tape snake or crawl. Keep the rollers flexible and the tension moderate. 9. When the conveyor is equipped with baffles and cleaning devices, wear and tear on the tape should be avoided. 10. Cleanliness is a basic condition for the good operation of adhesive tape. Foreign substances can affect tape eccentricity, tension differences, and even breakage. 11. When early damage to the tape is found during use, the cause should be promptly identified and repaired to avoid adverse consequences.Quality requirementThe quality of polyimide tape is very important. Have you ever learned about the quality requirements of polyimide tape? Let me take a look.1、The adhesion of polyimide tape should be long-lasting and should not dry out after a period of time;2. When tearing off the polyimide high-temperature tape, it should be able to be completely removed;3. When removed after completion, the polyimide tape should not have any residue or images;4. After long-term bonding of polyimide tape, there should be no bubbles floating or curled edges;5. Polyimide tape must have weather resistance when used outdoors; 6. Polyimide tape must not have crystal dots.The way to distinguishAt present, there are many manufacturers of polyimide tape on the market, and the product quality is also uneven. Is there any way to identify the authenticity of polyimide tape? Now, the editor will bring you a method to identify authenticity.1、Looking at the appearance, generally speaking, low-quality high-temperature tape has a slightly dull color, while high-quality gold finger high-temperature tape has a relatively good surface gloss.2. Look at the residue after ignition, bake with a lighter for 1 to 2 seconds, and then touch with your hand. The high-temperature tape of the golden finger really won’t stick to your hands.3. In actual high-temperature testing, after passing through a high temperature of 260 ° C, check for residual glue, shrinkage, and other phenomena, because the temperature resistance of real gold finger high-temperature tape is usually between 120 ° C and 260 ° C.PTFE/FEP/F46 Adhesive Polyimide Tape Film
he film preparation method is as follows: polyamide acid solution flow forming film, stretching, high temperature imide.Thin film is yellow transparent, relative density 1.39 ~ 1.45, has outstanding high temperature resistance, radiation resistance, chemical corrosion resistance and electrical insulation properties, can be used in 250 ~ 280ºC air for a long time.The vitrification temperatures are 280ºC(Upilex R), 385ºC(Kapton) and above 500ºC (Upilex S), respectively.The tensile strength is 200MPa at 20ºC and greater than 100MPa at 200ºC.It is especially suitable for flexible printed circuit board base material and insulation material of various high temperature resistant electric motor.High temperature tape: basic knowledge, common types and differences
High temperature tape usually refers to adhesive materials that can maintain good adhesion under certain high temperature environments, mainly including single-sided tape and double-sided tape. These tapes have a wide range of applications in the manufacturing of industrial electronic products, and their high temperature resistance is mainly manifested in their ability to maintain stability under temperature conditions between 120 degrees and 260 degrees. The temperature resistance of high-temperature adhesive tape mainly depends on the properties of its substrate and adhesive. Several common high-temperature adhesive tapes on the market currently include PET polyester film substrate coated acrylic adhesive, PET polyester film coated high-temperature silicone adhesive, PI polyimide film coated acrylic adhesive, PI polyimide film coated high-temperature silicone adhesive, and PTFE tape. These high-temperature tapes have different temperature resistance properties,PET polyester film substrate coated with acrylic adhesive, available in transparent, brown (gold finger), green, black, and other colors. This material generally has a long-term temperature resistance of between 130-150 degrees and a short-term temperature resistance of up to 180 degrees (within half an hour).PET based polyester film coated with high-temperature silicone, available in transparent, brown (gold finger), green (commonly known as green silicone), black, and other colors. This material can withstand temperatures between 150-180 degrees Celsius for a long time and up to 220 degrees Celsius for a short period of time (within half an hour).PI substrate polyimide film coated with acrylic adhesive, with colors including brown (real gold finger), black, white, and so on. This material can withstand temperatures between 180-230 degrees Celsius for a long time and up to 280 degrees Celsius for a short period of time (within half an hour).PI substrate polyimide film coated with high-temperature silicone, with colors including brown (true golden finger), black, and so on. This material can withstand temperatures between 220-260 degrees Celsius for a long time and up to 300 degrees Celsius for a short period of time (within half an hour).Teflon tape (also called Teflon tape) is a kind of high temperature resistant tape, which is made of glass fiber as the base cloth, coated with Teflon lotion, dried, and then coated with silica gel twice. This material can withstand temperatures of 260-300 degrees Celsius for a long time and up to 350 degrees Celsius for a short period of time (within half an hour). Among these high-temperature tapes, the one coated with PI polyimide film and high-temperature silicone is considered to have the best comprehensive performance. Whether in terms of temperature resistance, dielectric performance, processability, or chemical resistance, PI silicone high-temperature tape is the most excellent one.Polyamide Sheet Polyimide Film Heater Polyimide Film Suppliers
Polymide film is a kind of special plastic film, flat and smooth, no crease, no particular air bubble and no pinhole, with excellent mechanical properties, dielectric properties, long-term working temperature-195 degree to 280 degree, widely used in sophisticated products in appliance, statellite navigation, digital product, electric motors, computer, mobile phone and so on, such as the base dielectrics in flexible printed circuits (FPC), tape automated bonding (TAB), pressure sensitive tape (PST), and insulation for electric motor(Insulation). It has excellent electrical insulation properties, mechanical properties, excellent temperature resistance, resistance to Radiation, chemical stability and flame retardancy and etc. it is widely used for wire insulation wrapping and coil insulation binding of largeindustrial motors, traction motors, and generators.Application of 3M Tape in Communication Industry
3M tape is widely used in computers, mobile phones, communications, household appliances, audio-visual equipment, automobiles and other products. It can be selected according to the application products and environmental needs. Refer to the following: 1. The non-woven substrate has good double-sided adhesion and processability. Generally, the long-term temperature resistance is 70-80 °C, the short-term temperature resistance is 100-120 °C, and the thickness is generally 0.08-0.15 MM. It is suitable for the lamination of inscription boards and plastics. Automobiles, mobile phones, electrical appliances, sponge, rubber, signs, paper products, toys and other industries, assembly of home appliances and electronic instrument parts, display lenses. 2. The substrate-free double-sided adhesive has excellent bonding effect to prevent shedding and excellent waterproof performance. It has good processability and good temperature resistance. The short-term temperature resistance is 204-230 °C, and the general long-term temperature resistance is 120-145 °C. The thickness is generally 0.05-0.13 MM, suitable for the bonding of inscription boards, panels, and decorative parts. 3. PET substrate double-sided adhesive has good temperature resistance and strong shear resistance. Generally, the long-term temperature resistance is 100-125 °C, the short-term temperature resistance is 150-200 °C, and the thickness is generally 0.048-0.2 MM. It is suitable for inscription boards, LCD, Adhesion of decorations and decorative parts. 4. The foam substrate double-sided adhesive has softness, good adherence, good initial stickiness and stickiness, good solvent resistance and ultraviolet resistance. The general thickness is 0.4-1.0 MM, short-term temperature resistance is 130-150 °C, and long-term temperature resistance 80-93 °C, suitable for the bonding of air conditioners, office furniture, and communication products, can replace the screw fixing design, making the product more beautiful. 5. The hot melt adhesive film has good consistency and uniform adhesion thickness, does not contain solvents, is easy to process, and has good adhesion to many objects. The thickness is 0.1 MM, the color is translucent/amber, and the hot melt softening temperature 116-123 ℃. Applicable to the bonding of nameplates, plastics and hardware; Good results can also be obtained on the surface of uneven objects. The recommended initial bonding conditions are: temperature 132-138 °C, bonding time 1-2 seconds, and pressure 10-20 psi.Application of High Temperature Resistant Green Tape in Circuit Board Industry
The green tape PET material is a relatively common film on the market at present. In fact, the plastic Coke bottles we usually see are made of PET material, also known as Baote bottles. The chemical name is polyester film. The PET material film is characterized by relatively high texture. It is hard, scratch-resistant, and it will not turn yellow and grease like PVC material after long-term use. However, generally PET film is adsorbed by static electricity, which is relatively * foaming and falling off, but even if it falls off, it can be washed in clean water. It can be reused, and the price of PET film is much more expensive than PVC film. PET Green High Temperature Spray Tape High Temperature Resistant Green Tape PET Green High Temperature Spray Tape High Temperature Resistant Green Tape Supply of PET Green High Temperature Tape High Temperature Spray Protective Tape Green High Temperature Spray Tape (PCB Protection High Temperature Resistance) PET Double Sided Adhesive Acid and Alkali Resistant Tape High Temperature Resistant Tape No. SMY-206 Green tape Substrate PET thickness (um) 70 Tension kgf/mm > 10 Stripping force gf/in 750 Temperature resistance ° c 180-230 PCB protection, high temperature resistance, easy to pull off treatment. It is used to cover the gold finger during the immersion process of the circuit board, prevent the electroplating solution from being immersed and polluted, protect the circuit board electroplating, high temperature resistant paint and powder spraying industries. Features: This product has high temperature resistance, good chemical solvent resistance, High adhesion, softness and no residue when torn off. High temperature resistance, solvent resistance, flame resistance, insulation and high heat dissipation, PC board shields gold fingers and printed circuit boards through tin furnacesThe characteristics and applications of the brown high-temperature tape commonly seen on production lines
Polyimide film (PI) tape is a high-performance high-temperature tape made from polyimide film as the tape material. Its main uses are heat-resistant shielding and heat-resistant insulation for electronic boards.Due to the high thermal decomposition temperature of polyimide, it has excellent heat resistance and insulation performance. Many polyimide tape products use silicone adhesives, which have the advantage of leaving no residue even after being removed. Polyimide (PI) film tape not only features high-temperature resistance, chemical corrosion resistance, good insulation, and super strong adhesion, but also possesses other excellent properties such as radiation resistance, flame retardancy, wear resistance, and anti-corrosion. Polyimide (PI) tape can be classified into two types based on the adhesive used: PI silicone tape and PI acrylic tape. In terms of appearance, it is generally available in two colors: brown and black. Product Features:High temperature resistance: Polyimide film tape has good high temperature resistance and can withstand temperatures up to 400 ℃.Chemical corrosion resistance: Polyimide film tape is not easily corroded by chemical substances and has strong corrosion resistance.Good insulation: Polyimide film tape has excellent insulation performance and can effectively protect electrical equipment.Super strong adhesion: Polyimide film tape has strong adhesion and can firmly fix objects without deformation or damage at high temperatures.Anti corrosion: Polyimide film tape has excellent anti-corrosion performance, which can prevent rusting of metal materials such as steel.Product application:PI silicone tape is mainly used for applications that require high temperature resistance or high initial adhesion, such as insulation wrapping of H-grade motor and transformer coils, fixing and wrapping of high temperature resistant coil ends, thermal resistance protection for thermometers, insulation for capacitors and wire entanglement and other bonding under high temperature working conditions, temperature protection for PCB sheet metal fingers and electronic components during SMT, external wrapping of polymer lithium batteries, etc.PI acrylic tape is commonly used for insulation protection of PCB boards, fixing and wrapping of wire harnesses, interlayer and outer wrapping of transformer coils, external insulation of lithium batteries, etc.Characteristics of PolyimidePolyimide is a general term for polymer compounds polymerized by imide bonds, but the material used for polyimide tape is aromatic polyimide, which is made of aromatic compounds polymerized by imide bonds.Due to its strong adhesive strength, it has high strength, heat resistance, and insulation properties. The thermal decomposition temperature exceeds 500 ℃.The specific characteristics of the molecular structure that endow it with excellent heat resistance are as follows:Aromatic compounds have conjugated structures through imide bonds.Due to the aromatic rings being located on the same plane, the molecular chains are tightly packed together.Highly polar imide bonds have strong intermolecular forces.In addition, the coefficient of expansion during heating is relatively low, so even when used at high temperatures, it will not expand too much, thereby reducing dimensional errors.Definition of Polyimide Industry
The polyimide (PI) industry is an industrial chain system centered around polyimide materials, covering their research and development, production, processing, and application. Polyimide is a high-performance polymer material known as the “golden polymer material” due to its extreme high temperature resistance, chemical stability, mechanical strength, and electrical insulation properties. It is widely used in high-precision fields such as electronics, aerospace, and new energy. Core elements of industry definition*** * Material characteristics**-Molecular structure: The main chain contains repeated imide rings (- CO-NR-CO -), which endow it with high thermal stability and rigidity.-* * Performance label * *: High temperature resistance (long-term use temperature>250 ℃), radiation resistance, corrosion resistance, low dielectric constant (suitable for high-frequency scenarios), high mechanical strength.* * Composition of the industrial chain**-Upstream: Raw material suppliers (such as diamines, dianhydride monomers, such as ODA, PMDA, etc.).-* * Middle stream * : manufacturing of polyimide resin, film, fiber, foam and other forms. – * Downstream * *: Terminal applications in electronics, aerospace, automotive, new energy, military industry, etc.* * Product Form**-* * Thin film * * (such as flexible circuit substrate, insulation tape);-Resin (high-temperature resistant coating, adhesive);-* * Fiber * * (fireproof clothing, high-temperature filter material);-* * foam * * (spacecraft thermal insulation material). Industry Development Status**High technical barriers**-The synthesis process is complex (requiring high-temperature condensation and imidization), and the purity requirements for raw materials are extremely high (such as monomer ODA, PMDA).-High end products such as transparent polyimide and ultra-thin films are monopolized by American and Japanese companies such as DuPont, Ube Industries, and Zhongyuan Chemical.* * Market demand driven**-* * Electronic field * : 5G communication, flexible display (foldable screen phones), chip packaging (PI photoresist). – * New energy * *: lithium battery separator, fuel cell proton exchange membrane.-Aerospace: Lightweight high-temperature components (engine hood, satellite thermal control film). Industry Development Trends*** * Domestic substitution acceleration**-Policy support (Guidelines for the Development of New Materials Industry) promotes the research and development of high-end PI materials and reduces dependence on imports.* * Expansion of Emerging Applications**-* * Flexible Electronics * *: Foldable devices, flexible sensors;-New energy vehicles: motor insulation system, battery thermal management;-Semiconductor: Advanced packaging with PI photoresist.* * Greening and low-cost**-Develop bio based monomers (to reduce petroleum dependence) and optimize synthesis processes (low-temperature solution method). Industry Challenges** -Raw material monopoly: Key monomers (such as PMDA) are controlled by Japanese companies such as Ube and Mitsubishi; -* * Equipment limitations * *: High end film production relies on imported equipment (such as biaxial stretching machines); -Environmental pressure: Traditional processes using toxic solvents (such as DMAC) require a transition to green processes. * * Summary** The polyimide industry is a typical high-tech barrier and high value-added new material field, and its development level directly reflects a country’s competitiveness in high-end manufacturing and cutting-edge technology fields. In the future, industry growth will rely on * * technological breakthroughs * * (monomer synthesis, process optimization), * * industry chain collaboration * * (upstream and downstream support), and * * application scenario innovation * * (such as deep space exploration, artificial intelligence hardware).Golden finger high-temperature tape, also known as Kapton tape or polyimide tape
It is a high-performance adhesive tape made of polyimide film as the substrate, coated with high-performance organic silicon pressure-sensitive adhesive on one side, and composite or non composite with single-sided fluoroplastic release material.Performance characteristicsA. High temperature resistance: Long term working temperature can reach 260 ℃, and short-term processing can be carried out below 300 ℃. It can still maintain good performance in high temperature environments without problems such as delamination, residual glue, and substrate deformation B. Chemical resistance: It has excellent solvent resistance and good resistance to chemicals such as acids, bases, and salts. It can be used normally in a certain degree of chemical corrosion environment. C. Electrical insulation: With excellent dielectric performance and good electrical insulation effect, it can be used for insulation wrapping and protection in electronic devices, effectively preventing problems such as circuit short circuit and leakage. D. Mechanical properties: High mechanical strength, high tensile strength, good flexibility and ductility, can tightly adhere to various shaped surfaces, including flat, curved, and complex irregular surfaces. E. No residual adhesive: Imported silicone pressure-sensitive adhesive is used as the adhesive, and there is no residual adhesive left after the tape is torn off, avoiding contamination and damage to the surface of the object being pastedClassificationAccording to different applications, gold finger high-temperature tape can be divided into gold finger double-sided tape, anti-static gold finger tape, composite gold finger tape, and SMT gold finger tape, etcSpecificationsA. Width: Common widths include 10mm, 15mm, 20mm, 25mm, etc., and can also be customized according to customer needs, ranging from a few millimeters to tens of centimetersB. Thickness: Common thicknesses include 50U, 75U, 100U, etc., and the thickness can also be adjusted as neededC. Length: Generally, each roll is 33 meters long and can also be customizedColor: Usually brown or golden yellow, but can also be customized into other colors according to customer requirements, such as coffee, black, white, etc.Application FieldsA. Electronic and electrical industry: used for insulation wrapping of H-class motors and transformer coils with high requirements, fixing of high-temperature resistant coil ends, thermal resistance protection for temperature measurement, entanglement of capacitors and wires, and other adhesive insulation under high temperature working conditionsB. Circuit board manufacturing industry: suitable for electronic protection pasting, especially for SMT temperature protection, electronic switches, PCB board metal finger protection, electronic transformers, relays and other electronic components that require high temperature resistance and moisture-proof protectionC. Metal processing industry: used for high-temperature spray painting and sandblasting coating of metal materials to shield surface protection. After high-temperature spray painting and baking, it is easy to peel off without leaving residual adhesive.D. Other fields: In the aerospace industry, it is used for sealing, fixing, and fire-resistant protection in high-temperature environments such as aircraft and rockets; In the automotive industry, it can be used for sealing and protecting high-temperature components such as engines, transmissions, and braking systems; In the medical equipment industry, it can be used for sealing and protection of high-temperature sterilizers.Storage conditionsIt should be stored in an environment with 10-30 ℃ and relative humidity of 40-70%, avoiding direct sunlight and high temperature (above 40 ℃) and high humidity (75% RH). The storage period is generally 6 months.High temperature resistant white glass cloth tape
High temperature resistant white glass cloth tape is a special tape made of glass fiber cloth as the substrate, coated with high-performance pressure-sensitive adhesive (usually silicone). Due to its excellent heat resistance, insulation, and mechanical strength, it is widely used in high-end industrial fields such as electronics, electrical, aerospace, etc.🔥 Core FeaturesThe core advantage of this type of tape is its ability to withstand temperatures far beyond ordinary tape and provide excellent physical protection.Excellent temperature resistance: This is its most core characteristic. Most products can withstand high temperatures of 200 ℃ for a long time, and even extreme temperatures of 260 ℃ in the short term. Some high-performance models, such as 3M ™ 361, capable of withstanding temperatures up to 450 ° F (approximately 232 ° C) and intermittent use up to 550 ° F (approximately 288 ° C) or higher.Excellent mechanical strength: The glass fiber cloth substrate provides extremely high tensile strength and tear resistance. For example, the tensile strength of the Nitto P-212 can reach 323 N/10mm, effectively resisting wear and physical damage.Reliable electrical insulation: As an H-grade heat-resistant insulation material, it has good dielectric strength and can effectively prevent circuit short circuits. For example, the breakdown voltage of Nitto ST-HG-T (R) can reach 4.5 kV.Clean removal performance: High quality adhesive tape can be removed without leaving any residue when used in high-temperature environments.Other excellent features: usually also have solvent resistance and flame retardancy (such as certified by UL510 or F.A.R. 25.853)typical useBased on its characteristics, this tape is mainly used in the following scenarios:Electrical insulation: used for insulation wrapping and fixing of motors, transformers, motors, and coils.High temperature protection: Protect the surface of the workpiece during processes such as high-temperature sandblasting and electroplating.High temperature shielding: Used for shielding purposes in processes such as baking paint and heat treatment that require high temperatures.Bundling and fixing: used in the automotive and aerospace fields for wire harness bundling, pipeline sealing, etcPET green high-temperature tape
PET green high-temperature tape is a special tape made of polyester film (PET) as the substrate, coated with high-temperature resistant organic silicon pressure-sensitive adhesive. Due to its excellent performance in harsh environments such as high temperatures and chemical corrosion, it is widely used in industries such as electronics, automotive, and painting.Here is the core information about it:🏆 Main FeaturesHigh temperature resistance: It can be used for a long time in the temperature range of -20 ℃ to 200 ℃, and some high-quality products can even withstand high temperatures of 230 ℃ to 250 ℃ in the short term. Usually, there is no residue at 200 ℃ for 30 minutes.Chemical resistance: It can effectively resist corrosion from acids, alkalis, solvents, electroplating solutions, etc.Insulation: It has good electrical insulation performance and can withstand high voltage.Non residue adhesive: After high temperature or long-term use, it is not easy to leave adhesive marks when peeled off, and it provides good protection for the surface of the object being pasted.Soft and snug: The substrate is soft and can adhere well to surfaces of different shapes.📊 Technical parameters (typical values)The following are typical parameters of common models in the market, which may vary among different brands and models:Reference source for typical parameter valuesSubstrate Polyester Film (PET)Adhesive based organic silicon pressure-sensitive adhesiveTotal thickness 0.06mm, 0.075mm, 0.085mm, 0.11mm, etcAdhesive force is about 6.2 N/25mmTensile strength 124/155 kg/25mmThe elongation at break is about 120%Temperature resistance of 200 ℃ for 30 minutes without residual adhesive🎯 Main applicationsElectronics industry: Protect gold fingers during PCB electroplating, wave soldering, and reflow soldering; Tin plating and high-temperature shielding of electronic component leads; Insulation wrapping for motors, coils, and transformers.Coating industry: shielding protection during high-temperature baking paint and powder coating processes.Other fields: High temperature spray paint protection for industries such as automobiles and home appliances; Glass curtain wall assembly, building sealing, etcGold Finger High Temperature Resistant Insulation Tape
Gold finger high-temperature resistant insulation tape is a crucial auxiliary material in the field of electronic manufacturing and maintenance. Its core components are polyimide (PI) film and high-temperature resistant silicone pressure-sensitive adhesive.Its core features can be summarized as follows:Excellent high temperature resistance: This is its most prominent feature. Short term tolerance to high temperatures ranging from 260 ℃ to 300 ℃, and long-term use can also remain stable at around 260 ℃. It can also maintain performance at low temperatures of -60 ℃.Reliable electrical insulation: The insulation level reaches H level, which can effectively prevent circuit short circuits and electrical interference.Strong chemical resistance: able to resist the erosion of acids, alkalis, and solvents, protecting the underlying circuits from damage.Excellent "no residue" feature: After high-temperature processing, tearing off the tape will not leave stubborn residue on the protected surface (such as golden fingers).Good physical properties: stretch resistance, friction resistance, tear resistance, can be die cut into various shapes.Anti static characteristics (some models): Some high-end models have anti-static functions, which can protect precision electronic components that are sensitive to static electricity.Color and appearance: usually presented in brown (amber) or golden yellow, semi transparent.Thickness: Very thin, with common specifications of 0.05mm and 0.06mm, able to tightly adhere to precision components.Main application scenariosIts applications are very extensive, mainly concentrated in the following areas:PCB circuit board protection: used in wave soldering and reflow soldering processes to protect the "golden fingers" (gold-plated contacts on the edges of the PCB board) from contamination by soldering or plating solutions. This is also why it is commonly referred to as' golden finger tape '.Insulation of electronic components: used for high-temperature insulation wrapping and fixing of components such as transformers, motors, coils, capacitors, etc.Lithium battery manufacturing: used for fixing and insulating the positive and negative electrode ears during the production process of lithium batteries.Industrial spray coating masking: used for masking protection in spray painting and baking processes that require high temperature baking, and there is no residue after tearing off.R&D and testing: used for temporary fixation and protection during sample preparation and testing processes in the laboratory⚠️ Precautions for use and storageSurface cleaning: Before pasting, it is necessary to ensure that the surface to be pasted is clean, free of oil stains, and dust to ensure the best bonding effect.Remove after cooling: After use in high temperature environments, it should be completely cooled before removing to avoid damaging components or leaving residue due to thermal stress.Avoid repeated use: The adhesive strength of the tape may decrease due to use, and it is not recommended to reuse it.Storage environment: It should be stored in a cool, dry place, away from direct sunlight and high temperature and humidity environment. It is generally recommended to use it up within 6 months after receiving the goods.Pay attention to material compatibility: If the object being pasted contains plasticizers, the adhesion of the tape may be affected. It is best to test it before useHigh temperature tape made of Teflon
Teflon high-temperature tape is a special tape coated with "plastic king" polytetrafluoroethylene (PTFE), with core characteristics of high temperature resistance, anti adhesion, corrosion resistance, and insulation.🔥 Core features and parametersTemperature resistance range: Conventional range is -70 ° C to 260 ° C. Some special models can withstand peak high temperatures of 280 ° C to 300 ° C in the short term.Performance characteristics: It has an extremely low coefficient of friction (anti sticking), excellent chemical corrosion resistance, reliable electrical insulation (moisture resistance), as well as high strength and wear resistance.📏 Common types and parametersThere are mainly two types of products on the market, and thickness is a key parameter when selecting:Pure PTFE film tape: The thickness is usually between 0.08mm and 0.5mm. Good flexibility and excellent insulation, commonly used for electronic insulation, small object anti sticking, etc.Fiberglass cloth tape: The thickness is usually between 0.13mm and 0.40mm. High strength and good tear resistance, suitable for industrial applications that require high mechanical strength, such as roller wrapping and heat sealing machine guide rails.Thickness selection reference: For household sealing machines and DIY insulation, choose 0.13mm; for strength and sealing, choose 0.18mm-0.25mm; Select 0.18mm or above for industrial heavy load or continuous high temperature.🛠️ Main application scenariosIndustrial machinery: heat sealing machine, bag making machine, sizing machine, roller anti sticking coating.Electronic and electrical: insulation protection in high temperature environments, wrapping of batteries and coils.Food and Medicine: Used for heat sealing of food packaging, some models that have passed food grade certification can be directly contacted.Hot forming and demolding: mold demolding layer, anti sticking protection for plastic heat sealing equipment.✅ Quick shopping guideClear requirements: Determine the type (membrane based or cloth based) and thickness based on the intended use.Check key indicators: confirm whether the maximum temperature resistance (conventional 260 ° C), width, and length meet the requirements📝 Usage and Storage InstructionsSurface treatment: Before pasting, be sure to clean the surface of oil and dust to ensure firmness.Avoid overheating: Prolonged exposure to temperatures exceeding 260 ° C can lead to adhesive failure or PTFE coating aging.Prevent damage: Avoid contact with sharp objects to prevent damage to the substrate or fiberglass layer.Storage conditions: Store in the dark at room temperature (about 25 ° C), away from heat sources and chemical solventsPET brown heat-resistant tape
PET brown high-temperature resistant tape is a single-sided tape made of polyester film as the substrate, coated with high-temperature resistant silicone or acrylic adhesive. It is mainly used for high-temperature shielding and insulation protection in the fields of electronics, electrical appliances, etc.The following is detailed information about the product:Key FeaturesHigh temperature resistance: It can usually work stably in the temperature range of 180 ° C to 220 ° C, with a short-term temperature resistance of up to 260 ° C. Some products claim to be able to withstand 200 ° C for a long time.Core advantages:Clean peeling: After the high-temperature process, it can be peeled off without leaving any adhesive residue, which is one of its main selling points.Electrical insulation: It has good electrical insulation performance.Chemical resistance: able to withstand common acid, alkali, and solvent corrosion.High cost-effectiveness: It can be used as a substitute for higher priced polyimide (PI, commonly known as gold finger) tape within the economic temperature range.Main application scenariosThe application field of this tape is very wide, especially indispensable in the following scenarios:Electronic manufacturing: used for high-temperature shielding protection of printed circuit boards (PCBs) during wave soldering and reflow soldering processes.Lithium battery production: widely used for insulation and fixation in key processes such as electrode ear protection, cell wrapping, pack fixation, and termination of lithium batteries.Surface treatment: Used as masking tape in spraying, baking, and electroplating processes to protect areas that do not require treatment.Other industrial uses: such as interlayer insulation wrapping of transformer coils, fixing of electronic components, etc.Specifications and processesCommon specifications: The standard length is mostly 33 meters per roll, the thickness can range from 0.05mm to 0.15mm, and the width can be customized according to needs. The maximum width of the substrate can reach 1020 millimeters.Manufacturing process: The core is the coating process. Uniformly apply high-temperature resistant pressure-sensitive adhesive (usually silicone) onto the pre treated PET substrate, and then heat cure it in an oven to form a stable adhesive layer.Market Trends and StandardsMarket trend: Driven by the electronics and new energy industries, market demand continues to grow. The industry is developing towards ultra-thin technology to meet the protection needs of high-density and miniaturized electronic components.National standards: Currently, the physical performance testing standards followed by this product may refer to national standards such as GB/T 2792 (peel strength testing method) and GB/T 4852 (initial adhesion testing method).💡 PrecautionsWhen selecting and using, please pay attention to the following points:Distinguishing similar products: The commonly seen "brown tape" in the market may be polyimide (PI) tape or PET tape. PI tape usually has higher temperature resistance (up to 260 ° C in the long term), but the cost is also higher. Be sure to choose according to your process temperature requirements and budget.Selection of rubber series: Silicone series is the mainstream, with high temperature resistance and good chemical resistance; Acrylic adhesive may have better adhesion on certain surfaces or be used for specific applications such as lithium battery pack bundling. Confirm that the adhesive system is compatible with your application environmentHigh temperature textured paper tape
High temperature textured paper tape is an advanced product developed on the basis of traditional textured paper tape. It is designed specifically for high temperature environments and can withstand temperatures ranging from 120 ℃ to 280 ℃. After completion of work, it achieves clean peeling without residual adhesive. It is widely used in fields such as automotive painting, electronic manufacturing, and home appliance production, with the core mission of providing precise and reliable shielding protection in high-temperature operations.🌡️ Main types and temperature resistance levelsTypical Temperature Range, Key Characteristics, Applicable Scenarios ExamplesRoom temperature type with basic shelter below 80 ℃, moderate viscosity for indoor decoration, and lightweight wrappingMedium temperature type with improved temperature resistance from 80 ℃ to 120 ℃, stable viscosity for automotive spray painting and conventional baking paintHigh temperature type 120 ℃ -280 ℃ Excellent heat resistance, strong adhesion, extremely low residual adhesive, high-temperature baking paint, electronic welding protectionUltra high temperature type 200 ℃ -300 ℃+special adhesive system (such as silicone), high temperature resistance limit, special industrial spraying, extreme high temperature processIt should be noted that the temperature resistance of different products is usually divided into long-term and short-term temperature resistance. For example, 3M 244 tape can withstand 150 ℃ for a long time and can withstand high temperatures of 180 ℃ in a short period of time. Be sure to pay attention to these two indicators when purchasing.🛠️ Core application areas🎨 Automotive and industrial spraying: precise masking during spraying to achieve clear edges and prevent paint leakage. The medium temperature type is used for ordinary baking paint, while the high temperature type is suitable for high-temperature baking paint processes above 200 ℃.⚡ Electronic manufacturing: used to protect gold fingers during wave soldering/reflow soldering of printed circuit boards; In the manufacturing of components such as transformers and coils, high-temperature insulation wrapping is used.🏠 Home and Decoration: Precise protection during the application of grout and color separation coating on walls to prevent cross contamination and ensure construction effectiveness.✈️ Other fields: It is also widely used in aerospace component spraying, shipbuilding, metal heat treatment local protection and other applications with strict precision requirements📝 Key selection parametersIn addition to the brand, the following technical parameters should also be considered when purchasing to ensure that the tape matches your specific needs:Temperature resistance and time: Check the long-term/short-term temperature resistance value of the tape, as well as the time it can maintain stability at that temperature (such as "can withstand 30 minutes at 150 ℃").Substrate and adhesive system: Understand the characteristics of different substrates (such as corrugated paper, washi paper, PET composite) and adhesive systems (such as rubber, acrylic, silicone).Viscosity and tensile strength: Pay attention to data such as peel strength and tensile strength to evaluate the adhesion strength and toughness of the tape.Size and color: There are various specifications for tape width, length, thickness, etc. Color can also be used to distinguish processes.Residual adhesive properties: High quality high-temperature textured paper tape should be able to easily peel off without leaving any residual adhesive even at high temperatures.👍 Usage and Paste TechniquesSurface treatment: Before pasting, it is necessary to ensure that the surface is clean, dry, free of oil stains or dust, which is the basis for optimal adhesion.Apply pressure: After pasting, use your fingers or tools to evenly apply pressure along the tape, ensuring that the tape is in full contact with the surface and avoiding bubbles.Stripping method: After completing the high-temperature operation, slowly and evenly peel off the tape from one end at an angle of nearly 180 degrees while the tape is not completely cooled (but still requires safe operation), which can minimize residual adhesive to the greatest extent possible.Avoid over stretching: When pasting, avoid over stretching the tape to prevent pulling force caused by thermal shrinkage.Test before use: Before using on special or expensive surfaces, it is best to test the adhesion and tear off effect of the tape in an inconspicuous location.Storage environment: Please store the tape in a cool, dry, and dark original packaging to prevent moisture or performance degradation.⚠️ PrecautionsCorrect selection: It is necessary to confirm whether the temperature resistance level of the tape can cover the highest temperature of your process to avoid tape failure due to overheating.Single use: It is not recommended to reuse it to avoid affecting the masking effect or causing insufficient adhesion.Beyond the performance boundary: Even if it can withstand high temperatures, it does not mean that it can withstand extreme temperatures or come into contact with highly corrosive chemicals for a long pliant use: Do not use industrial tape for food contact or direct medical purposes.Operation safety: When working in high temperature environments, please pay attention to personal protection and avoid burnsTea colored polyimide high-temperature resistant tape
Tea colored polyimide high-temperature resistant tape is a special tape made of polyimide film as the substrate and coated with high-temperature resistant silicone adhesive. It is known for its excellent heat resistance, excellent electrical insulation, and "residue free" characteristics.This tape is named "Gold Finger Tape" due to its amber appearance and widespread use to protect the "Gold Fingers" on printed circuit boards (PCBs). It is an indispensable material in the field of electronic manufacturing.The following are detailed parameters, features, applications, and purchasing guidelines for this product.1. Product parametersThe standard specifications for brown polyimide tape are as follows, but many suppliers also support customization.Typical numerical values/description notes for parameter itemsThe substrate polyimide film (PI Film) determines its high heat resistance and insulation performanceSilicone PSA adhesive is heat-resistant and not easily residual after removalColor: Tea/Amber for easy identification and positioning during the homework processThe commonly used thickness is 0.05mm-0.06mm (approximately 1.97-2.36 mil), but there are also models such as 0.025mm (1 mil) and 0.075mm (3 mil)Temperature resistance range - continuous use: around 260 ° C (500 ° F)-Short term tolerance: above 300 ° C (such as 10-30 minutes). This is the core indicator and varies among different brandsStandard length of 33 meters, some brands can provide other lengthsInsulation level H, long-term working temperature can reach 180 ° C, able to withstand higher temperature impactsSome products with UL510 flame retardant certification have this safety certificationEnvironmental standards such as RoHS and Halogen Free meet the environmental requirements of modern electronic manufacturing2. Core features and advantagesExcellent high temperature resistance: This is its core characteristic, which can work continuously at high temperatures of 260 ° C and withstand temperatures of 300 ° C or even higher in a short period of time, such as reflow soldering, wave soldering and other process environments.Excellent electrical insulation: As an H-grade insulation material, it can effectively prevent circuit short circuits and leakage, ensuring the safe operation of electronic devices.Non residue adhesive characteristic: This is the key advantage that distinguishes it from ordinary high-temperature adhesive tape. After high-temperature operation, it can be cleanly peeled off without leaving any sticky residue on the surface of the protected object (such as PCB metal fingers), eliminating the need for subsequent cleaning processes.Excellent chemical resistance: able to resist corrosion from various acids, alkalis, and solvents, maintaining stable performance in harsh production environments.Good physical properties: tensile and tear resistance, with a certain degree of toughness, dimensional stability at high temperatures, and not easily deformed.3. Main applicationsElectronic manufacturing industry: This is its main application area. Used to protect the gold fingers, other sensitive contacts or areas on the PCB board during SMT surface mounting, reflow soldering, and wave soldering processes, preventing them from being contaminated by solder or damaged by high temperatures.Electrical insulation: used for interlayer insulation and external bundling fixation of electronic components such as transformers, motors, coils, capacitors, etc.Battery industry: used for insulation fixation of positive and negative electrodes of lithium batteries and wrapping of battery cells.General industry: used for shielding and protection during high-temperature spraying, baking paint, and powder coatingPET double-sided tape, stretch resistant double-sided tape
PET double-sided adhesive tape "usually refers to a double-sided adhesive tape made of PET (polyester film) as the substrate, which combines high tensile strength and strong adhesion. The "pull resistance" of this type of tape is mainly reflected in two core indicators:Tensile strength: The maximum tensile force that the tape itself can withstand, usually measured in N/cm. The higher the value, the stronger the tape, and the less likely it is to break when stretched.Adhesive strength (such as peel force, shear force): The degree of firmness of the tape after it is adhered to the surface of an object. Even when subjected to force and pulling, excellent adhesive performance ensures that the tape will not separate from the adhered objectKey points for purchasingWhen making a purchase, in addition to comparing parameters, you also need to pay attention to these four points:Clarify the requirement for "tensile resistance": Do you need resistance to physical tension or shear force? Tensile strength and shear strength are two different concepts.Evaluate the usage environment: Do you need high temperature resistance? Long term temperature or short-term temperature? For example, 3M 9019 has a short-term temperature resistance of 121 ° C and a long-term temperature resistance of 82 ° C, while tesa 68575 has a short-term temperature resistance of up to 200 ° C.Determine the material of the adhesive: The adhesive strength of the tape to specific materials (such as low surface energy plastics PP/PE, metals, PET, etc.) may vary, and the product technical parameter table needs to be checked.Consider processing technology: If it is necessary to die cut into a specific shape, the substrate strength (such as tesa 68575) and die cutting performance of the tape are key considerations.summarySimply put, the "tensile" performance of PET double-sided tape is a comprehensive reflection of the tensile resistance of the tape substrate and the adhesive bonding ability. Choosing the right product for your application scenario is essentially finding the optimal balance between tensile strength, adhesive strength, thickness, and environmental resistanceTeflon high-temperature cloth PTFE
Teflon high-temperature cloth is a high-performance composite material that combines the strength of glass fiber with the excellent properties of PTFE (polytetrafluoroethylene). The core value of PTFE high-temperature cloth is that it simultaneously solves the two most difficult problems of "extreme temperature resistance" and "anti adhesion" in industrial scenarios.🤔 What is Teflon high-temperature cloth?In brief, Teflon high-temperature cloth (also known as Teflon high-temperature cloth, PTFE high-temperature cloth) is a composite material made of high-strength glass fiber cloth as the skeleton, impregnated with PTFE (Teflon) lotion, and sintered at high temperature. It perfectly combines the dimensional stability of glass fiber with the many advantages of PTFE.✨ List of Core FeaturesHere are the reasons why it has become a key material in many fields:Excellent high and low temperature resistance: It can work continuously in the temperature range of -196 ℃ to+260 ℃, and can withstand high temperatures up to 350-400 ℃ in a short period of time.Outstanding anti stick (non stick) properties: Almost all substances are difficult to adhere to and easy to clean.Extremely strong chemical inertness: able to withstand corrosion from almost all strong acids, strong bases, aqua regia, and organic solvents.Extremely low friction coefficient: The surface friction coefficient is as low as 0.05-0.1.Excellent electrical insulation: With a low dielectric constant (about 2.6), it is an ideal electrical insulation material.Good dimensional stability: The tensile elongation is extremely low, less than 5 ‰ (0.5 ‰).Fireproof and flame retardant properties: extinguish immediately upon ignition, in compliance with fire safety standards.🌡️ What is the specific temperature resistance performance?Its heat resistance is very stable:Long term stability: After continuous use at a high temperature of 250 ℃ for 200 days, its strength and weight remain basically unchanged.Short term tolerance: After being placed at a high temperature of 350 ℃ for 120 hours, the weight reduction is only about 0.6%.Extreme low temperature: In an ultra-low temperature environment of -180 ℃, the material will not become brittle and can still maintain its original softness.🏭 What are the main application areas?With these characteristics, PTFE high-temperature cloth has a wide range of applications, mainly including:The main role played by typical examples in application fieldsFood processing baking sheet, baking pad, microwave oven liner, food drying conveyor belt, anti stick, high temperature resistant, easy to clean, food grade safetyIndustrial machinery dryer conveyor belt, adhesive machine belt, sealing belt, plastic welding cloth, high temperature resistance, dimensional stability, anti sticking, wear-resistantElectronic and electrical high-frequency copper-clad laminates, insulation gaskets, cable cladding layers, high-temperature resistant tape substrates with excellent insulation, high temperature resistance, and corrosion resistanceChemical anti-corrosion pipeline anti-corrosion coating, valve sealing gasket, reactor liner, soft connection extremely resistant to chemical corrosion, good sealing performanceThe conveyor belt and covering cloth of the new energy photovoltaic module laminating machine prevent module adhesion and deformation, ensuring laminating qualityThe membrane structure roofs of sports stadiums, stations, and other buildings in the field of architecture combine high strength and flexibility, and are weather resistant and transparentOther applications such as anti-static floor mats, anti adhesive liners, and aerospace insulation layers have excellent comprehensive performance, meeting high-end needs📐 Specification and grade classificationThere are various specifications and grades of PTFE high-temperature cloth on the market to meet different needs:Grade ClassificationOrdinary industrial grade: meets the basic requirements of heat resistance, anti sticking, and anti-corrosion.Standard level: The surface is smoother, the non stick performance is better, and it is suitable for high-precision demolding and other scenarios.Food grade: Certified by FDA and other authorities, it can directly come into contact with food and is used for baking and food processing.Anti static level: The surface resistance is extremely low (≤ 10 ΩΩ), which can prevent static electricity accumulation and is used in sensitive environments such as electronic manufacturing.Thickness selectionThe thickness usually ranges from 0.08mm to 1.2mm:0.08-0.25mm: Suitable for scenarios that require high flexibility and precision, such as electronic insulation and food gaskets.0.35-0.90mm: Higher strength, more durable, suitable for heavy-duty applications such as industrial conveyor belts and pipeline wrapping.💡 Usage and selection suggestionsDistinguishing quality: When choosing, attention can be paid to its dimensional stability (elongation should be less than 5 ‰, i.e. 0.5%), whether the surface is smooth and flat, and temperature resistance. You can refer to the specific product specifications provided by various manufacturers.Safe use: For safety reasons, the temperature should be controlled below 260 ℃ as much as possible during use. If the temperature is higher than 260 ℃, the material will accelerate wear; When the temperature exceeds 300 ℃, a small amount of smoke may be released. It is important to ensure good ventilation and avoid inhalationTea colored PI gold finger heat-resistant tape
Tea colored PI gold finger high-temperature resistant tape is a single-sided tape made of polyimide (PI) film as the substrate and coated with high-temperature resistant silicone gel. It is widely used in precision protection and insulation scenarios in the field of electronics and electrical engineering due to its excellent heat resistance, insulation, and chemical resistance.🔥 Core FeaturesExcellent temperature resistance: This is its core advantage. Most products can work stably for a long time at temperatures ranging from 260 ℃ to 280 ℃, and can withstand short-term impacts of 300 ℃ or even higher. Even in extreme environments, it can maintain good physical and electrical performance.Strong insulation and protection capabilities: Its substrate polyimide itself has high insulation and high voltage resistance characteristics (some products can withstand voltages of up to 6kV or more). At the same time, it can withstand the erosion of various chemicals such as acids, alkalis, and solvents.No residual glue, easy to peel off: Applying silicone gel as an adhesive ensures that no viscous residue is left on the surface of the sticker when it is peeled off after high-temperature processing, effectively ensuring the cleanliness of subsequent processes.High mechanical strength and toughness: The product has high tear resistance and good flexibility, which can adapt to various complex surfaces and is not easily damaged.Environmental compliance: Most products comply with RoHS environmental halogen-free standards, meeting the environmental requirements of modern manufacturing industry.🎯 Main application scenariosPCB/PCBA manufacturing: During wave soldering or reflow soldering, it can effectively "protect key areas such as gold fingers" from solder contamination or high temperature damage.Electrical insulation and wrapping: commonly used for coil insulation wrapping of H-class motors, transformers, relays, and capacitors, providing reliable electrical isolation and thermal protection.Lithium battery manufacturing: In the production of lithium batteries, it is used for insulation shielding in the electrode ear (gold finger) area of the battery cell to prevent short circuits, and is easy to disassemble later due to its "no residue" characteristic.High temperature spraying and masking: can be applied in high-temperature baking paint, powder spraying and other processes as a masking and protective material, which can be easily peeled off after completion.SMT process assistance: It can be used to fix flexible circuit boards (FPCs) or fixtures during SMT surface mount reflow soldering.Precision electronic assembly: suitable for high-temperature bonding of electronic components, or positioning and fixing through customized die-cutting in automated production lines⚠️ Usage and StorageBefore use: Ensure that the surface being pasted is clean, dry, and free of oil stains to achieve the best pasting effect.When in use: It is recommended to adhere at room temperature and apply appropriate pressure; After high-temperature operation, wait for complete cooling before tearing to avoid residue.Storage: Keep in a cool, dry place, away from light and moisture, avoid heavy pressure or sharp objects from scratching
